Track Saws Vs Panel Saws

Introduction

Panel saws and track saws are carpentry tools which are different and at the same time similar. Despite the fact the two tools can perform similar tasks, they are quite different when it comes to size, price and the kind of project or cut each can do. In this review, we will contrast the two saws in terms of type of cut, size and footprint, size and finally precision. The features highlighted below will help you decide if you will go for a track saw or a panel saw.

What is panel saw?

Panel saws usually come in two types namely vertical and horizontal panel saws. These saws are primarily used for ripping and crosscutting huge boards of wood to size. Both the vertical and horizontal panel saws are large, however, horizontal panel saw is a bit bigger and takes more footprint when compared to the vertical saw because it is like a table saw but a bit larger.

These saws are for the most part utilized by bureau shops to cut wooden boards, sheet products, and hardwood, and compressed wood, plastic sheets and so on. They’re additionally used by sign shops for slicing sheets made of aluminum, wooden sheets and plastic sheets for making their signs.

What is Track saw?

Track saws then again resemble the celebrated circular saws that come with guide rails and slides that enable an individual to make long rips or accurately crosscut. You can simply think about a track saw as an ordinary circular saw that accompanies guide rails which gives tracks to you to make long cuts with the saw without committing any errors.

Differences Between Track saws and Panel saws

Sometimes differentiating between the two saws can be a challenge to many people. Below are some of the differences between a track and a panel saw.

Type of cut

The significant similarity between a panel saw and a track saw is that the two saws can be utilized to rip and cross-cut huge boards of wood into sizable sheets. Then again, the significant distinction between the two saws is that while a track saw can be moved around between cuts, a panel saw is a fixed device that should be kept in one spot during the cuts.

Size and footprint

A track saw is smaller and can be moved around easily during cuts. Because of its smaller size, it takes less footprint and can be operated easily. On the other hand, a panel saw particularly the horizontal model is larger and takes a large footprint in your area of work. Moreover, they cannot be easily moved because they are stationary.

Cost

Track saws are cheaper when contrasted with panel saws which are a bit expensive. However, that will rely upon the size of the panel saw that you need to utilize. When compared to standard track saws, smaller panel saws are very affordable.

Precision

When properly handled, both saws provide high precision cuts.

Mobility

This one is extremely self-evident. Track saws are progressively versatile. You can take a track saw from one spot or place of work to the next without any problem. This is different with panel saws. Panel saws are stationary equipment, and in this manner difficult to move them from one point to another. You have to disassemble them before you move them.

Which is the winner?

The features mentioned above clearly highlight the similarities and differences between the two saws. The two saws can play out a similar role without any problem. Even though panel saws are a bit costly they are best for cutting larger wood boards. They can cut wood of up to 4×8 foot wood pieces into sizable sizes. Panel saws are additionally relatively easy to operate when compared to track saws.

The track saws anyway are littler, less expensive and offers better portability. You can without much struggle move a track saw from one place of work to the next because its littler when contrasted with a panel saw.

Though both saws are great for ripping and crosscutting, panel saws have an upper hand even though they are large and stationary.

FAQs


What is a track saw good for?

Track saws are utilized to make long, exact cuts in materials made of wood quicker and more productively than table and circular saws. Besides, they are versatile, light-weight, and since elastic strips on the base of the track prevent slips, they additionally do not need clamping before getting started.

Do I need a track saw?

It is difficult to underestimate the importance of a track saw in a workshop. In case you need cuts that are accurate on almost any size of a piece of wood, then the best option is the track saw. They are additionally portable and small giving you the convenience you need.

What is the panel saw used for?

These saws are for the most part utilized by bureau shops to cut wooden boards, sheet products, hardwood, compressed wood, plastic sheets and so on. They’re additionally used by sign shops for slicing sheets made of aluminium, wooden sheets and plastic sheets for making their signs.

How long is a panel saw?

Panel saws vary in length but their length range between 16-24 inches. Smaller versions are ideal when working making cuts inside shops.

How deep can a track saw cut?

Track saws’ cut depth of up to 2 5/32” permits you to handle a number of projects faster and even allows you to cut through many wood pieces at a time.

carpentry

While having the two saws in the workshop appears as though an extraordinary thought it isn’t generally fundamental. A track saw is incredible enough, lightweight and exceptionally good if you move from one place to another constantly. On the other hand, if you don’t move constantly and need a powerful tool that can handle larger projects, then a panel saw is the way to go.

If you are looking for the best saws you are in the right place. On our website, you will find information regarding woodworking and other related projects.